- Forums
- »
- Technics Organs Forum
- »
- ex sx 70
|
Viewing 1 to 7 (7 Total) ex sx 70 |
|
|---|---|
manu01420France Total Posts: 5
Joined: February 26, 2017
|
hello has all and all
Tags:
Posted on February 27, 2017 at 6:27 AM
|
|
|
|
davetuttUnited Kingdom Total Posts: 166
Joined: January 12, 2015
|
Re: ex sx 70You probably need replacement ultra capacitors. With this model there are three of them on the card frame motherboard. You will need all three replaced. They are 10F 2.3v types and are available from many electronic component suppliers. However, I would advise you to find a local engineer to fit them for you as the organ is delicate and the card frame does not take kindly to be pulled around. I know, having done many and found that because of their age they tend to fall apart when you take the lid off.
Posted on February 27, 2017 at 10:31 PM
|
manu01420France Total Posts: 5
Joined: February 26, 2017
|
Re: ex sx 70merci pour votre reponse c est deja tres gentil a bientot Dave Tutt
Posted on February 28, 2017 at 10:32 AM
|
manu01420France Total Posts: 5
Joined: February 26, 2017
|
Re: ex sx 70hello
Posted on February 28, 2017 at 3:09 PM
|
davetuttUnited Kingdom Total Posts: 166
Joined: January 12, 2015
|
Re: ex sx 70I think I have a scrap mother board with the ultra capacitors still on it in my workshop. I will put a picture of it up on the site tomorrow. The 70 is a derivative of the 66 and uses the same motherboard and plug in PCM technology so they are I believe fairly similar.
Posted on February 28, 2017 at 8:44 PM
|
manu01420France Total Posts: 5
Joined: February 26, 2017
|
Re: ex sx 70bonjour
Posted on March 1, 2017 at 6:05 AM
|
manu01420France Total Posts: 5
Joined: February 26, 2017
|
Re: ex sx 70hello Dave
Posted on April 16, 2017 at 2:39 PM
|
